Bullet Resistance Products

 

UL 752 - Level 1 UL 752 - Level 2 UL 752 - Level 3
Ammunition 9mm full metal copper jacket with lead core .357 Magnum jacketed lead soft point .44 Magnum lead semi-wad cutter gas checked
Grain 124 124 158
Grams 8.0 10.2 15.6
Minimum Velocity 1,175 fps 1,250 fps 1,350 fps
Maximum Velocity 1,293 fps 1,375 fps 1,485 fps
Single Sizes min: 2'-0" x 2'-0"
max: 4'-0" x 8'-0"
Pair Sizes min: 4'-0" x 2'-0"
max: 8'-0" x 8'-0"
Door Gauge 16 Gauge (0.053 min)
14 Gauge (0.067 min)		 16 Gauge (0.053 min)
14 Gauge (0.067 min)		 16 Gauge (0.053 min)
14 Gauge (0.067 min)
Material Types

Cold Rolled Steel (ASTM A1008)
A60 Galvannealed (ASTM A653)
Stainless Steel
Glazing Options Available See Note Below
Door Thickness 1 3/4" (+/- 1/16")
Frame Gauge 16 Gauge (0.053 min)
14 Gauge (0.067 min)		 14 Gauge (0.067 min) 14 Gauge (0.067 min)
Frame Depth 4 1/2" min - 15" max
Jamb Face 2" Face
Header Face 2" min, 4" max
Corner Construction Continuous/Full Profile Weld
Fire Rating up to 3 hours

* Glazing Notes: Bullet Rated Light Kit and Glass Required By Others. Min 12" x 12",  Max per Kit and Glass Listings

General Construction

  • Edge Type Options
    • Bevel Hinge & Lock Edge 1/8" over 2" (standard)
    • Square Edge
  • Edge Seam Options
    • Seamless - Bondo (Standard) - ANSI A250.8/SDI 100 Model 2
    • Seamless - Continuous Welded (Optional) - ANSI A250.8/SDI 100 Model 2
    • Open Seam  (Optional) - ANSI A250.8/SDI 100 Model 1
  • Top Channel
    • 16 Gauge (0.053 min)
    • Inverted (standard), Flush (optional), Water Tight Seal (optional)
    • Projection Welded
  • Bottom Channel
    • 16 Gauge (0.053 min)
    • Inverted (standard), Flush (optional)
    • Projection Welded
    • Weep Hole Provided
  • Reinforcements
    • Hinge - 7 Gauge (0.167 min)
    • Cylindrical Lock (Govt. 161) - 16 Gauge (0.053 min)
    • Mortise Lock (Govt. 86) - 11 Gauge (0.108 min)
    • Flush Bolts - 11 Gauge (0.108 min)
    • Surface Bolts - 14 Gauge (0.067 min)
    • Surface Closer - 14 Gauge (0.067 min)
    • Surface Holder/Stop - 14 Gauge (0.067 min)
    • Pull Plates/Bars - 14 Gauge (0.067 min)
    • Surface Applied Exit Devices - 14 Gauge (0.067 min)
    • Pivots - 7 Gauge (0.167 min)